FAQ
Home    /   Products    /   crude edible oil refining machine with chemical process machine

crude edible oil refining machine with chemical process machine

Chemical-type oil refining process for Sunflowerseed,Sunflower oil refining process plant,sunflower oil production plant line

Chemical-type oil refining process for Sunflowerseed,Sunflower oil refining process plant,sunflower oil production plant line

Chemical-type oil refining process for Sunflowerseed,Sunflower oilrefining process plant,sunflower oil production plant line Application of our edible oil refinery plant Coconut oil, soybean oil, mustard seed oil, cottonseed oil, sunflower seed oil, peanut oil, rice bran oil, safflower seed oil, corn germ oil. Camellia seed oil ,etc. The main flow chart of Chemical-type oil refining process for Sunflowerseed,Sunflower oil refining process plant,sunflower oil production plant line
1. NeutralizationWe should put the estimated lye into the crude oil while we must stir it quicly. The time for putting the lye is 5-10Minutes, we keep on stirring it for 30minutes after the lye is in the crude oil.
2. Static settlement
3. WashingAfter the static settlement. We let the soap leavings go from the tank bottom . then we adjust the oil tempreture to 70-75°C. In order to remove the residual lye and soap. The hot water is 10-15% of the oil.
4. DryingWe must dry the oil because it has 0.5% more or less water in the oil.
5. FliterWe filter the oil after the tempreture is lower 70°C by Dewatering and cooling.Main parts of Chemical-type oil refining process for Sunflowerseed,Sunflower oil refining process plant,sunflower oil production plant lineDe-mixed, degumming , dehydration, deacidification, d...
crude edible oil refining machine with chemical process machinery

crude edible oil refining machine with chemical process machinery


1. Extraction Section Processing of edible oil refining machine :(1) The material (for pretreatment) is sent to rotary extraction by the scraper conveyor. The material will extracted by the solvent or mix oil. After this step, we will get meal and mix oil. (2) Meal is sent to toaster. Through the toaster, the solvent in the meal will separate from the meal. The solvent goes (3) After the mix oil from the rotary extraction enters into 1st evaporator and 2nd evaporator, most of the solvent in the mix oil is separated. (4) The mix oil from 2nd evaporator goes to stripping tower and almost all the solvent is separated. From the stripping tower, we can get crude oil and solvent. The solvent is sent to condenser and is recycled to rotary extraction. stripping tower, we can get crude oil and solvent. The solvent is sent
2. Oil Refining Machine Degumming: We are using a special wet degumming,Thorough removal of colloid. Improve the quality of rice bran oil.Decoloring : Premixing the a certain amount of clay with 20% degumming oil in the premix tank , then using the oil pump pump the premixing oil and the rest 80% oil in the vacuum decolorization tower to get rid of the pigment,then using platetype filter to separate the oil and the waste clay.Dewaxing: Wax affects the taste of the oil a...

Refinery chemical process machinery oil machinery for palm

Refinery chemical process machinery oil machinery for palm


1. Extraction Section Processing of oil machinery for palm :(1) The material (for pretreatment) is sent to rotary extraction by the scraper conveyor. The material will extracted by the solvent or mix oil. After this step, we will get meal and mix oil. (2) Meal is sent to toaster. Through the toaster, the solvent in the meal will separate from the meal. The solvent goes (3) After the mix oil from the rotary extraction enters into 1st evaporator and 2nd evaporator, most of the solvent in the mix oil is separated. (4) The mix oil from 2nd evaporator goes to stripping tower and almost all the solvent is separated. From the stripping tower, we can get crude oil and solvent. The solvent is sent to condenser and is recycled to rotary extraction. stripping tower, we can get crude oil and solvent. The solvent is sent
2. oil machinery for palm Degumming: We are using a special wet degumming,Thorough removal of colloid. Improve the quality of rice bran oil.Decoloring : Premixing the a certain amount of clay with 20% degumming oil in the premix tank , then using the oil pump pump the premixing oil and the rest 80% oil in the vacuum decolorization tower to get rid of the pigment,then using platetype filter to separate the oil and the waste clay.Dewaxing: Wax affects the taste of the oil and...

2016 Continuous edible oil chemical refining

2016 Continuous edible oil chemical refining


1.Edible oil chemical refining:Usually there are two kinds of edible oil refining method,chemical oi refining and physical oil refining.Oil refinery plant refers to a series of refining processes that can remove phospholipids, FFA, pigment, off-flavor and other impurities in the oil. Edible oil refinery or vegetable oil refinery is essential to ensure removal of gums, waxes, phosphatides and free fatty acid (F. F.A.) from the oil. To impart uniform colorby removal of coloring pigments and to get rid of unpleasant smell from the oil by removal of odiferous matter.The purpose of oil refining:To make edible oil meet people’s edible,and to remove the impurities in the crude oil.There is much impuries in crude oil,such as phosphatides,oxidized product,gums,free fatty acids,colour bodies,trace metals,water,hydrocarbons,solvents,polymerized product.
2. Edible oil chemical refining parts:(1) Refining section: used to P-acid de-gumming, alkali refining de-acid and water rinsing.(2) Decoloring section: used to remove off pigments, bleaching oils and grease dehydrate.(3) Deodorizing section: to remove off the odor components in oil.(4) Dewax: used to remove off the wax in the oil, in order to get the high quality oil.(5) Heat-transfer oil stove: supply each device production needing heat energy, temperature reach above 280°C.(6) Steam generator: produce the needing steam for...
Chemical Physical Refining Edible Oil Refinery Plants

Chemical Physical Refining Edible Oil Refinery Plants

Edible Oil Refinery Plants 1, High Performance2,Save Energy3,Easy Operation4,Include Installation Chemical Physical Refining Edible Oil Refinery Plants (take the groundnut as an example)Pressing Process Introduction:High-quality groundnut→Cleaning→Crushing→Flaking→Cooking→ Pressing → Settlement→Crude oil ↓ ↑Prepressed cake→ Secondary pressing→Extraction plantGrade I oil can be achieved by this processExtraction Plant IntroductionTechnical Process Introduction:Flake→Extraction→Wet meal→Desolventizing→Cooling→Finished meal packaging ↓ Miscella→Filteration→Vacuum evaporation →Crude oil ↓ Solvent recoveryFeatures of Qi'E Rotocel Extraction:a) Adopt stainless steel fixed grid plate and increase the horizontal grid plates, which can prevent the strong miscella from flowing back to the blanking case, so as to ensure good extraction effect;b) The rotocel extractor is driven by rack, with unique rotor of balanced design, low rotating speed, low power, smooth operation, no noise and quite low maintenance cos...
Chemical refine castor seeds oil refining machine

Chemical refine castor seeds oil refining machine

Chemical refine castor seeds oil refining machine
1.Characteristics of Edible oil refinery plant This units belongs to intermittent refining oil equipment, has all functions of large, small scale intermittent refining equipment, and better than them. This equipment can produce high-cooking oil or salad oil. This units complete set combined, self-prepare heat source, gas source, electrics control. Light weight, save electricity , convenient use, this machine do not need special basis, either indoor or outdoor is OK, just need to make up power source, water, prepare coal, alkali, P-acid, active clay, edible salt and other consume materials.
2. Units devices of Edible oil refinery plant (1). Refining pot: used to P-acid de-gumming, alkali refining de-acid and water rinsing.(2).De-color pot: used to remove off pigments, bleaching oils and grease de-hydrate. (3).De-odor pot: used to remove off oils odor, foreign smells (stainless made)Heat-transfer oil stove: supply each device production needing heat energy, temperature reach above 280 ° C.(4).Steam generator: produce the needing steam for de-odoring and distillation. (5).Vacuum pump: supply needing vacuum for dehydrate, de-color, de-odor. Vacuum degree can reach above 755mmHg.(6).Press filter: filter clay, filter out clear oil.(7).Air compressor: blow dry bleached clay, blow empty the leftover oil in the press filter.
3.Main refining process of Edible oil refinery plant (1).P-acid degumming operation...
Comination physical and chemical crude oil refinery

Comination physical and chemical crude oil refinery

DefinitionWhat is crude oil refinery?The crude oil obtained either from expellers or solvent extraction plant contains impurities, which must be removed to make the oil edible, more palatable and stable against rancidity upon storage. The process of removing these impurities is called refining.
TechnologyClassification of cottonseed oil refinery :In operation type:A. Batch Type B. Semi-continuous Type C. Full Continuous TypeIn technology :A. Chemical Type B. Physical Type C. Both Chemical And Physical TypeBatch TypeAdapt to 1-10t/d small capacity plantSemi-continuous TypeAdapt to 10-30t/d medium capacity plantContinuous TypeAdapt to 30t/d and above capacity plantWhat is crude oil refinery Process?Step
1.Degumming with water to remove the easily hydratable phospholipids and metals.
Step
2.Addition of a small amount of phosphoric or citric acid to convert the remaining non-hydralable phospholipids (Ca, Mg salts) into hydratable phospholipids.
Step
3.Neutralising of the free fatty acids with a slight excess of sodium hydroxide solution, followed by the washing out of soaps and hydrated phospholipids.
Step
4.Bleaching with natural or acid-activated clay minerals to adsorb colouring components and to decompose hydroperoxides.
Step
5.Deodorising to remove volatile c...
Chemical sunflower eible oil refining machine

Chemical sunflower eible oil refining machine

Chemical sunflower eible oil refining machine Henan Best Grain & Oil Machinery Engineering Co., Ltd. which specialize in producing edible oil mechanical equipment, a group enterprise integrating scientific research, manufacturing, sales as one . BEST has been undertaking more than 200 sets of oils and fats production turnkey projects . has passed the international quality management system ISO 9001 and CE certificate. It has the qualification of manufacturing one or more types of pressure vessel . Go with BEST, to be the best. Do what you think-BEST! Chemical sunflower eible oil refining machine Refining purpose ---To remove impurities, improve edible and storage stability,safety . ---Improved flavor, color, improve product quality. ---As oil deep processing products provide raw materials, to extract the valuable by-products. our advantages (1) Professional technical team, provide strong support for the equipment manufacturing and installation.(2) Equipment of the steel we choose SS/CS, has many years experience and very professional workers engaged in welding and assembly. Don't worry about the quality of the product.(3) We have our own factory, there is no third party sales, so our price is lower.refining processoil refining is based on the different of oil and the impurities in the physical and chemical peoperties,separate the grease and impurity by some technical ways,in order to improve the oil edible,storage stability and safety process...
Physic and chemical transformer oil refining machine

Physic and chemical transformer oil refining machine

Oil refining linewhat's refining?
Refining is an essential process for a complete oil pressing line because there are still some impurities, such as phospholipids, FFA, pigment, odor, etc. in crude oil. can provide you professional technical support and fabricate high quality oil making machines as per your specific requirements. Meanwhile, can provide you turnkey oil refining solution.What's the refining oil production line?
1. Crude Oil Degumming: Gums in crude oil are removed by hydration with the help of phosphoric acid.

2. Neutralization: Free fatty acids are neutralized by using sodium hydroxide and convert them into soap. Additional impurities are also removed by adsorption on soap.

3. Bleaching: During bleaching, unwanted pigments are adsorbed physically and oil will become much clearer.

4. Deodorization: It is used to remove unacceptable odors by steam distillation, the odoriferous compound are stripped off with the help of live injected steam into heated oil under high vacuum pressure.

5. Dewaxing (necessary for cold areas)
Some kinds of oil like sunflower oil, maize germ or corn oil contains waxes inside, if these impurities are not removed, the oil will freeze easily under low temperature, thus effecting oil quality and appearance. so this process is necessary in extremely cold areas.
Main Features1)We professional in edible oil equipment more than 30 years.2): BV/CE/ISO90013)We provides design, manufac...
Automatic Weighing Type 4-50kg 200L Drum Large Barrel Lube Edible Oil Methyl Alcohol Chemical Filling Machine

Automatic Weighing Type 4-50kg 200L Drum Large Barrel Lube Edible Oil Methyl Alcohol Chemical Filling Machine

Product Introduction This machine is suitable for quantitative filling of water, emulsion and low viscosity chemical materials.The weighing method is adopted, which the metering is accurate, the production capacity is high, and the use and maintenance are convenient and quick. This machine adopts the chain blocker plate,intermittently enters the barrel, locates, fills the metering and discharges the barrel; the filling valve of the machine adopts the double-speed filling method, firstly the fast filling, when the dose reaches the predetermined capacity, the quick conversion Slow filling; the filling valve is fully closed when the dose reaches the required dose.This machine can be combined with a single-head capping machine or a screwing cap machine into the production. Main performance parameters
1.Power supply: AC 220V/380V ; 50HW/60HW2,Power: 0.5KW3,Filling capacity : 10-30Kg4,Production capacity : 300-600/(Barrel/hour)5,Filling accuracy : ±3g6,Number of filling heads: 67,Measurement method :Weighing type8,Equipped with gas source: 0.65Mpa9,Weight: 200kg10,Dimensions: 1800x1000x1900mmMachine DetailsSuitable bottles Company facilitatePacking & DeliveryPackaging Details:Standard export packing suitable for long distance land and sea transportation. Detail:Shipped in 45 working days after advance payment and sample bottles and capers received.Loading Port:Sh...