FAQ
Home    /   Products    /   cootamundra canola oil plant

cootamundra canola oil plant

Canola Seed Oil Processing Plant ,Canola Seed Oil Produce Produce Machine

Canola Seed Oil Processing Plant ,Canola Seed Oil Produce Produce Machine

Canola Seed Oil Processing Plant Canola Seed Oil Processing Plant Pre-pressing Flow chart:
Canola Seed Oil Pre-pressing Flow chart: Canola Seeds →Metering machine→Magnetic separation→Clearing→Softing→Flaker→Steam Cooker→Prepressing→Filter→Cake →Countercurrent cold and dry box→To solvent extraction plant ↓ Crude oil ↓ RefiningMain Process description:
1.Metering machine:To meter quantity canola seeds. Discharge them to temporary storage tank. If there have matter in this production. You need to close this meter machine to stope produce. This can prevent seed over load.
2.Magnetic selector:Magnetic separation equipment without power and exhaust system were used to remove iron. Dust removing wind net is installed.
3.Cleaning: In order to obtain high effective cleaning, ensure good work condition and production stability, high efficient vibration screen was used in the process to separate big and small impurity.
4.Flaker: Flaking means a certainty granularity of canola lamella was prepared for flaked of about 0.5 mm, the oil of raw material can ...
Dewaxing equipment for canola oil,Chinese canola oil processing manufacturer

Dewaxing equipment for canola oil,Chinese canola oil processing manufacturer

Dewaxing equipment for canola oilTechnology Introduction of Dewaxing equipment for canola oil : oil dewaxing machine and production technology developed by our company is of advanced technology, full computer automatic cooperation, lower investment cost, high liquid oil yield, high solid fat purity and high economic benefit.- oil dewaxing machine is a kind of new oil processing technology.- By using oil dewaxing machine , the s Corn oil products of different melting points can be obtained, such as 8, 10, 1 4, 18, 2 4, 3 3, 4 4, 55 degree etc.- At the same time, it can also be used to process palm oil and sunflower seed oil, which can greatly improve additional value of oil products, and increase economic benefits of the enterprise. The main process of Dewaxing equipment for canola oil:(1) Dewax of Dewaxing equipment for canola : used to remove off the wax in the oil, in order to get the high quality oil.(2) Heat-transfer oil of Dewaxing equipment for canola oil : supply each device production needing heat energy, temperature reach above 280°C. (3) Steam generator of Dewaxing equipment for canola oil: produce the needing steam for de-odoring and distillation.(4) Vacuum pump of Dewaxing equipment for canola oil machine : supply needing vacuum for dehydrate, de-color, de-odor. Vacuum d...
Oil making machine for canola extraction,canola oil solvent extraction plant equipment,best oil solvent extraction equipment

Oil making machine for canola extraction,canola oil solvent extraction plant equipment,best oil solvent extraction equipment

Oil making machine for canola extraction,canola oil solvent extractionplant equipment,best oil solvent extraction equipmentOur Features of Oil making machine for canola extraction,canola oil solvent extraction plant equipment,best oil solvent extraction equipment
3. The feeding system can adjust the rotating speed of airlock and main engine according to the feeding quantity and maintain a certain material level, which is beneficial to the micro negative pressure inside the extractor and reduce the solvent leakage;
4. The advanced miscella circulation process is designed to reduce the fresh solvent inputs, reduce the residual oil in meal, improve the miscella concentration and save energy by reducing the evaporation capacity;
5. The high material layer of the extractor helps to form immersion extraction, reduce the meal quality in miscella, improve the quality of crude oil and reduce the evaporation system scaling;
Specially suitable for the extraction of various pre-pressed meals.Introduction of Oil making machine for canola extraction,canola oil solvent extraction plant equipment,best oil solvent extraction equipment The cake from oil press section could also be used as raw material for solvent extraction plant, the chemical way to extract oil. This kind of extraction uses chemical solvent to...
Canola oil production machinery ,Professional canola oil processing machinery manufaturer

Canola oil production machinery ,Professional canola oil processing machinery manufaturer

Canola oil production machinery
1. Introduction of Canola oil production machinery (1) Function: Edible oil extraction machine is an oil extractor through soaking or spraying pre-pressed cake by a certain organic solvent. The principle of this part is the different solubility of solvent(2) Use range: Edible oil solvent extraction fits for pre-press extraction of high-oil- content materials and direct once time extraction of low-oil-content materials.(3) Main parts: The edible oil extraction making series includes rotary extractor, toaster, 1st evaporator, 2nd evaporator, stripping
2. Main parts function of Canola oil production machinery (1) Solvent pumps: continuously spray solvent to the rotary-typr extractor.(2) Roary extractor: spray and soak the pre-pressed cake with solvent so that oil fats can be dissolved in solvent (form miscella). After processing, you can get wet meal and miscella (mixed oil).(3) DTDC: used to separate the solvent from the wet meal.(4) Miscella tank 1st: pump the miscella ( oil with solvent) into the miscella 1st, then add 10% saline water to it. The phospholipid and impurities in the miscella will react with the saline water, at last the reactant precipitate, reaching the goal of purifying.(5) Miscella tank 2nd: the purified miscella will be pumped into it.(6) Miscella st...
Canola oil extraction plant /Canola oil processing machinery

Canola oil extraction plant /Canola oil processing machinery

We have been specialized in canola oil extraction plant since 196
7. We can offer whole line of canola oil extraction plant with turnkey service, capacity from 10 to 6000TPD . For special capacity, our engineers can help you design and install canola oil extraction plant according to your real conditions.
Canola oil extraction plant starts with rapeseed, with oil content 40%, more or less. Same with other common oilseeds, there're four main sections of canola oil extraction plant, including prepressing/pressing/pretreatment section, solvent extraction section, refinery section and dewaxing/winterization section.
:Skype:sophia.zang1Mobile:+86 13526627860Phone:+86-371-5677 1823Website: E-mail: [email protected]
Canola edible oil production machine ,Professional canola oil processing machinery manufaturer

Canola edible oil production machine ,Professional canola oil processing machinery manufaturer

Canola edible oil production machine
1. Introduction of canola edible oil production machine (1) Function: Edible oil extraction machine is an oil extractor through soaking or spraying pre-pressed cake by a certain organic solvent. The principle of this part is the different solubility of solvent(2) Use range: Edible oil solvent extraction fits for pre-press extraction of high-oil- content materials and direct once time extraction of low-oil-content materials.(3) Main parts: The edible oil extraction making series includes rotary extractor, toaster, 1st evaporator, 2nd evaporator, stripping
2. Main parts function of Canola edible oil production machine (1) Solvent pumps: continuously spray solvent to the rotary-typr extractor.(2) Roary extractor: spray and soak the pre-pressed cake with solvent so that oil fats can be dissolved in solvent (form miscella). After processing, you can get wet meal and miscella (mixed oil).(3) DTDC: used to separate the solvent from the wet meal.(4) Miscella tank 1st: pump the miscella ( oil with solvent) into the miscella 1st, then add 10% saline water to it. The phospholipid and impurities in the miscella will react with the saline water, at last the reactant precipitate, reaching the goal of purifying.(5) Miscella tank 2nd: the purified miscella will be pumped into it....
Oil extraction machine for canola oil extraction machine,canola oil extraction machinemanufacturer from 1982

Oil extraction machine for canola oil extraction machine,canola oil extraction machinemanufacturer from 1982


1.Edible oil pretreatment ---canola oil extraction machine canola oil extraction machine - Main Equipments:
1. Storange tanks: Oil seeds receiving and storage
2. Magnetic box: Clearing the iron impurity which might be in the oil seeds. The iron impurity will be harmful to the following machines, so we need take the iron impurities out.
3. Cleaning: This parts have different size cleaning sieves to clean the different impurities. After going through this part, most of the impurities are moved from oil seeds.
4. Cooker: This machine can adjust the water content of the oil seeds. It’s also good for the press and oil extraction section.
5. Press: The press machine is used to take parts or all of the oil in the oil seeds. We will design the suitable machine according to your requirement.
6. Oil filter: After getting coconut oil, the filter is used to move the impurities in the oil.
2.Edible oil extraction -canola oil extraction machine canola oil extraction machine=========Main Equipments:
1. Solvent pumps: continuously spray solvent to the rotary-typr extractor.
2. Roary extractor: spray and soak the cake with solvent so that oil fats can be dissolved in solvent (form ...
Hot sale rapeseed oil extraction machine, canola seed processing equipment, canola oil solvent extraction plant

Hot sale rapeseed oil extraction machine, canola seed processing equipment, canola oil solvent extraction plant

Hot sale rapeseed oil extraction machine, canola seed processing equipment, canola oil solvent extraction plant MAIN PROCESS OF SOVLENT EXTRACTION:MAIN SECTIONS IN SOLVENT EXTRACTION SYSTEM:
1. Solvent extraction process;
2. Wet meal desolventizing process;
3. Evaporation process;
4. Solvent condensation & recovery process;
5. Paraffin recovery process.WHAT ARE QI'E SOLVENT EXTRACTION MACHINES LIKE?ABOUT QI'E ROTOCEL EXTRACTOR:a) Adopt stainless steel fixed grid plate and increase the horizontal grid plates, which can prevent the strong miscella from flowing back to the blanking case, so as to ensure good extraction effect;b) The rotocel extractor is driven by rack, with unique rotor of balanced design, low rotating speed, low power, smooth operation, no noise and quite low maintenance cost;c) The feeding system can adjust the rotating speed of airlock and main engine according to the feeding quantity and maintain a certain material level, which is beneficial to the micro negative pressure inside the extractor and reduce the solvent leakage. d) The advanced miscella circulation process is designed to reduce the fresh solvent inputs, reduce the residual oil in meal, improve the miscella concentration and save energy by reducing the evaporation capacity. e) The high material layer of th...
Canola oil production equipment for canola oil mills

Canola oil production equipment for canola oil mills

Oil Plant PictureCanola oil production equipment
Pre-treatment Pretreatment section is a very important section before extraction or pressing section.It will directly affect extraction or pressing effect.
Solvent extraction (1) The material (for pretreatment) is sent to rotary extraction by the scraper conveyor. The material will extracted by the solvent or mix oil. After this step, we will get meal and mix oil. the solvent or oil. After this step, we will get meal and oil.
(2) Meal is sent to toaster. Through the toaster, the solvent in the meal will separate from the meal. The solvent goes
(3) After the oil from the rotary extraction enters into 1st evaporator and 2nd evaporator, most of the solvent in the oil is separated.
(4) The oil from 2nd evaporator goes to stripping tower and almost all the solvent is separated. From the stripping tower, we can get crude oil and solvent. The solvent is sent
Refinig
1.Degumming:
Removing the phosphatide by adding hot water,when phosphatide meets hot water, it will become bigger and bigger, then out of tanks.

2.Deacidification:
Removing the FFA by add caustic soda (for taking neutrallzation reaction).

3.Bleaching:
Remove the pgment by adding bleaching earth andthe remaining bleaching earth will be filtrated by leaf fil...
20-2000T canola oil extraction plant with CE and ISO

20-2000T canola oil extraction plant with CE and ISO

canola oil extraction plant
1.The residual:<1%
2.1st grade canola oil
3.Patent technology
4.Good smell canola oil Canola Oil Extraction PlantThe whole canola oil extraction plant contains three s: canola oil seeds pretreatment , canola oil extraction and canola oil refining .
1. Craft flow for canola oil pretreatment oil seeds → magnetic box → cleaning → cooker → oil press → oil filter → to extraction Main Equipments:
1. Oil seeds: We can provide machine to process various oil seeds, such as canola, peanut, soybean, sunflower, coconut, mustard, palm rapeseed and so on.
2. Magnetic box: Clearing the iron impurity which might be in the oil seeds. The iron impurity will be harmful to the following machines, so we need take the iron impurities out.
3. Cleaning: This parts have different size cleaning sieves to clean the different impurities. After going through this part, most of the impurities are moved from oil seeds.
4. Cooker: This machine can adjust the water content of the oil seeds. It’s also good for the press and oil extraction section.
5. Press: The press machine is used to take parts or all of the oil in the oil seeds...