FAQ
Home    /   Products    /   hot and cold double squeezing small machines for sunflower oil extraction

hot and cold double squeezing small machines for sunflower oil extraction

virgin screw cold peanut oil squeezing machine/ peanut oil squeezing machine for Mexico

virgin screw cold peanut oil squeezing machine/ peanut oil squeezing machine for Mexico

Product DiscriptionPeanut cold pressing process:Husking→drying in the sun→selecting and cleaning→press→filterPeanut hot pressing process: Husking→fry→selecting and cleaning→press→filterBesides,our machine can press peanut with peanut shell and it can filter oil with vacuum oil filter. It means you just need one machine to finish the peanut pressing.High oil rate:34%-47% Peanut oil squeezing machineFeatures of oil press machine!
1.Make high quality and healthy oil!Mechanical squeezing craft does not harm the nutrients in the productive process!No chemical substances left.
2.High efficiency:Spiral type oil press just need press the oil plants by one time to get the maximum oil.
3.Cost-effective:Just need replace the wearing parts.The main machine can run for more than 10 years.
4.Diversified models:We have JW-40/60/80/100/125/130/150 with processing capacities from 15 to 450 kg/h.Application!
High Oil yield!
Low oil residue in cake!The cake determines the oil yield:The cake determines the oil yield,if it is too thick,it means it contains much residue oil and directly affects the oil yield.Normally,it should be 1-2mm, like a tile,not sticky,smooth inside,wrinkle outside, and the surface contains no oil.So in order to improve the oil rate,our new researched machine can control the thickness of cake between 0.8 to 2mm,and is a leader in the peer. The key parts of oil press machine: ...
6YL-80 cold and hot screw oil press machine,screw oil pressing machine,cold and hot double used oil pressing machine

6YL-80 cold and hot screw oil press machine,screw oil pressing machine,cold and hot double used oil pressing machine

6YL-80 cold and hot screw oil press machine,screw oil pressing machine,cold and hot double used oil pressing machineParts of 6YL-80 cold and hot screw oil press machine,screw oil pressing machine,cold and hot double used oil pressing machine
1.Screw oil press
2.Electrical element for heating chamber
3.Vacuum filter for cleaning oil
4.Squeezing bolt
5.Heating ringThe Main Features of 6YL-80 cold and hot screw oil press machine,screw oil pressing machine,cold and hot double used oil pressing machine

1. Energy Saving:The electric power can be reduced by 40% under the same output. The machine can save 6 kilowatt at an average of one hour.
2. Labor Saving:60% labor can be saved under the same output. One or two person can organize the production.
3. Widely Usage:The machine is multifunction. It can process more than 20 kinds of oil crops, such as soybean, peanut, linseed, sesame, rapeseeds, sunflower, cottonseeds, soybean, etc.
4. Oil Purity:Vacuum filter can filter the rude oil and ensure the oil quality.Technical parameters of 6YL-80 cold and hot screw oil press machine,screw oil pressing machine,cold and hot double used oil pressing machine Picture showing of 6YL-80 cold and hot screw oil press machine,screw oil pressingmachine,cold and hot double used oil press...
peanut oil squeezing machine peanut oil squeezing machine

peanut oil squeezing machine peanut oil squeezing machine

peanut oil squeezing machine
1.1st grade edible peanut oil
2.Patent technology peanut oil squeezing machine / peanut oil machine The whole peanut oil extraction machine contains three s: peanut pretreatment , peanut oil pressing and peanut refining .
1. Craft flow for peanut oil squeezing machine peanut →Magnitic seperating( Metal impurities) → cleaning →husking → flaking roll →Cooking → pressing-Workshop Main Equipments:
1. peanut : It’s one of main oil seeds from human. It’s used to make peanut oil around the world. The oil content in peanut is about 35%.
2. Magnetic box: Clearing the iron impurity which might be in the peanut . The iron impurity will be harmful to the following machines, so we need take the iron impurities out.
3. Cleaning: This parts have different size cleaning sieves to clean the different impurities. After going through this part, most of the impurities are moved from peanut .
4.
Bauxite double roller mill machine for clay brick, lab smooth double roll crusher 2pg 400×250 low price

Bauxite double roller mill machine for clay brick, lab smooth double roll crusher 2pg 400×250 low price

Bauxite double roller mill machine for clay brick, lab smooth double roll crusher 2pg 400x250 low price for sale Roll crusher is also called double roll crusher, double teeth roll crusher etc. The surface of roller crusher are made of high manganese steel, which can stand up to heat treatment. Double roller crusher is suitable for rough and intermediate crushing of brittle materials in such industries as cement, chemical industry, electric power, mine, building materials and metallurgy. The grain size of the input material is large, the particle size of the output product can be controlled, and it is possible to effectively destroy the material whose compressive strength is less than 160 MPa Double roller crusher is mainly used for secondary and fine crushing materials with soft or middle hardness like coal, coke,limestone etc. Application: Limestone,coal,coke,clinker, granite, basalt, cement, brick, tile,building material etc Advantage
1.
Oil Fried Instant Noodle Machine Production Line/Fixed Length Cutting Double-Speed Double-Shaft Dough Kneading

Oil Fried Instant Noodle Machine Production Line/Fixed Length Cutting Double-Speed Double-Shaft Dough Kneading

1: ITEM NAME: ALKALI MIXING TANKCAPACITY:500-1000KG PER TANKMATERIAL: SUS304/316FUNCTION: TO MIX WATER WITH SALT AND ADDITIVESMAIN PARAMETERS: MIXING TIME: 10MINS WATER CONTENT: PURED WATER BETTER 2: ITEM NAME: DOUGH MIXERCAPACITY:50-350KG PER BATCHMATERIAL: SUS304FUNCTION: TO MAKE FLOUR WITH WATER COMPLETELYMAIN PARAMETERS: MIXING TIME: 15-20MINS WATER CONTENT: 11-14% WATER ADD: 30-35% 3:ITEM NAME: MIXER PLATFORM SIZE: 6X6M OR 8X8M MATERIAL: CARBON STEEL FUNCTION: TO PUT THE MIXER AND ALKALI TANK MAIN PARAMETERS: STRONG ENOUGH FOR 2000KG PER SQM 4:ITEM NAME: CONTINUOUS DOUGH ROLLING MACHINE ROLLER WIDTH: 200-1500MM MATERIAL: ALLOY STEEL OR SUS304FUNCTION: TO ROLL THE DROUGH FROM 14MM TO 1MM THICKNESSMAIN PARAMETERS: DOUGH SHEET THICKNESS: 14-1MM ROLLING SPEED: 7M-10M PER MIN MOTOR TYPE: SOLO OR COMPOUND TYPE 5:ITEM NAME: NOODLE SLITTERWIDTH:200-1500MMMATERIAL: SUS304FUNCTION: TO SLITTING DOUGH SHEET TO NOODLESMAIN PARAMETERS: SLITTING SIZE: 0.7-5MM SLITTER TYPE: ROUND AND SQUARE 6:ITEM NAME: NOODLE CONTINUOUS STEAMERWIDTH:200-1500MMMATERIAL: SUS304FUNCTION: TO STEAM NOODLES CONTINUOUSLYMAIN PARAMETERS: STEAM TEMP:110C STEAM TIME: 180S STEAMER TYPE: 1 LAYER OR 3 LAYER 7:ITEM NAME: NOODLE CUTTER AND FOLDERWIDTH:200-1500MMMATERIAL: SUS30 4, SLICO...
Small scale cooking oil making squeezing machines

Small scale cooking oil making squeezing machines

small scale cooking oil making squeezing machinesThe major advantage in using a single pressing machine is that it greatly increases the oil yield. Oil press includes single pressing, double pressing and pre pressing. Single pressing machines are used to extract oil from most kinds of oil seeds and nuts.The flakes will be pressed by continuous screw press. After pressing, they fall into two parts: pressed oil and pressed cakes. This oil is more pure and healthy as it was not treated chemically.Some high oil content seeds need double press. So the oil can be extracted from oil seeds as much as possible. Oil seeds press extraction machines include hydraulic press and screw press.Screw press or expellerThe work shaft in barrel pushes the oil seeds material forward. The material is pressed as worm diameter increases and the diameter of barrel decreases when it is pushed forward. Oils in material gets out by way of cage bars. Screw press shaft is made of stainless steel. The bars in cage are 1*178mm or 3*276mm.We’ve all kinds of screw press, from small press to super big press, as shown in following table. Technical parameters of oil press extraction machines
Long using life cold and hot hydraulic squeezing oil machine

Long using life cold and hot hydraulic squeezing oil machine

Long using life cold and hot hydraulic squeezing oil machine
Hydraulic oil press machine is our patent equipment. The machine is specialized wrung sesame, peanut, walnuts, almonds etc. The machine is simple operation, high oil press rate, each pack 6-8 kg, 8-10 mintes wrung net.Detail information of cold and hot hydraulic squeezing oil machine
Main engineMain engine includes base, upright, top plate, oil drip pan nut and so on , it is one of the main parts. Firstly the oil material is put into the assembly of the press boring ,then it being droved up by the oil cylinder piston ,oil will outflow from the gap of press boring ,and then pass the oil drip pan to the drum for oil storage.Hydraulic systemHydraulic system is the main power force of this machine, it includes transmission shaft, turbine, worm gear, gear pump, high pressure pump, overflow valve; super high pressure safety valve; hand-operated valve; seamless steel tube; pipeline connect and other spare parts. This machine adopts the advanced power pack of the world, and compared with two plunger pump, it is faster , higher pressure and can resist higher temperature, it can continue working when the oil temperature is above 65 but needn’t cooling unit.Electronic systemElectronic system is the most advanced part of this machine, it is fully automa...
Automatic cold and hot hydraulic squeezing oil engine for Malaysia

Automatic cold and hot hydraulic squeezing oil engine for Malaysia

Automatic cold and hot hydraulic squeezing oil engine for Malaysia
Hydraulic oil press machine is our patent equipment. The machine is specialized wrung sesame, peanut, walnuts, almonds etc. The machine is simple operation, high oil press rate, each pack 6-8 kg, 8-10 mintes wrung net.Detail information of cold and hot hydraulic squeezing oil engine
Main engineMain engine includes base, upright, top plate, oil drip pan nut and so on , it is one of the main parts. Firstly the oil material is put into the assembly of the press boring ,then it being droved up by the oil cylinder piston ,oil will outflow from the gap of press boring ,and then pass the oil drip pan to the drum for oil storage.Hydraulic systemHydraulic system is the main power force of this machine, it includes transmission shaft, turbine, worm gear, gear pump, high pressure pump, overflow valve; super high pressure safety valve; hand-operated valve; seamless steel tube; pipeline connect and other spare parts. This machine adopts the advanced power pack of the world, and compared with two plunger pump, it is faster , higher pressure and can resist higher temperature, it can continue working when the oil temperature is above 65 but needn’t cooling unit.Electronic systemElectronic system is the most advanced part of this machine, it is fully au...
Qi'e new type equipment for edible oil extraction, cheap vegetable oil machine, oil squeezing machines

Qi'e new type equipment for edible oil extraction, cheap vegetable oil machine, oil squeezing machines

Qi'e new type equipment for edible oil extraction, cheap vegetable oil machine, oil squeezing machines MAIN PROCESS OF REFINING:WHAT ARE REFINING MACHINES LIKE?MAIN INTRODUCTION OF REFINING:Neutralization: The crude oil is output by the oil feed pump from the oil tank, and next enters the crude oil heat exchanger to recover part of heat after metering and then is heated to the required temperature by the heater. After that, the oil is mixed with the metered phosphoric acid or citric acid from phosphate tank in the gas mixture, and then enters the conditioning tank to make the non-hydratable phospholipids in oil change into the hydratable phospholipids. Add the alkali for neutralization, and the alkali quantity and alkali solution concentration depend on the quality of the crude oil. Through the heater, the neutralized oil is heated to the temperature (90°C) suitable for centrifugal separation to remove the phospholipids, FFA and other impurities in the crude oil. Washing: About 500ppm soap is still in the neutralized oil from the separator. To remove the remaining soap, add into the oil about 5~8% hot water, with water temperature 3~5 °C higher than the oil generally. To achieve more stable washing effect, add phosphoric acid or citric acid when washing. The re-mixed oil and water in the mixer is heated t...
Hot and Cold Double Pressing Sunflower Seeds Oil Extraction Machine

Hot and Cold Double Pressing Sunflower Seeds Oil Extraction Machine


1. Suitable for a variety of raw materials;
2. High oil production rate;
3. High cost performance;
4. One button intelligent, easy to operate;
5. The raw materials are pressed directly without frying.