FAQ
Home    /   Products    /   good sales sunflower oil facility

good sales sunflower oil facility

1st quality castor oil refining facility

1st quality castor oil refining facility

DefinitionWhat is castor oil refining facility?The crude oil obtained either from expellers or solvent extraction plant contains impurities, which must be removed to make the oil edible, more palatable and stable against rancidity upon storage. The process of removing these impurities is called refining.
TechnologyClassification of cottonseed oil refinery :In operation type:A. Batch Type B. Semi-continuous Type C. Full Continuous TypeIn technology :A. Chemical Type B. Physical Type C. Both Chemical And Physical TypeBatch TypeAdapt to 1-10t/d small capacity plantSemi-continuous TypeAdapt to 10-30t/d medium capacity plantContinuous TypeAdapt to 30t/d and above capacity plantWhat is castor oil refining facility Process?Step
1.Degumming with water to remove the easily hydratable phospholipids and metals.
Step
2.Addition of a small amount of phosphoric or citric acid to convert the remaining non-hydralable phospholipids (Ca, Mg salts) into hydratable phospholipids.
Step
3.Neutralising of the free fatty acids with a slight excess of sodium hydroxide solution, followed by the washing out of soaps and hydrated phospholipids.
Step
4.Bleaching with natural or acid-activated clay minerals to adsorb colouring components and to decompose hydroperoxides.
Step
5.Deodorising ...
Advanced technology of Cooking oil refinery facility

Advanced technology of Cooking oil refinery facility

Advanced technology of Cooking oil refinery facility Cooking oil refinery facility processing flowchart:
Cooking oil refinery facility working principle: 1,Degumming
Method of hydration degumming:
Using the hydrophilic groups in oils,add certain amount of hot water or dilute of acid, alkali,salt or other electrolyte solution,to make the colliod swell and condense. then sedimentating and separating.The sedimentation of colliod called nigre.Low temperature hydration 20- 30 degree,High temperature hydration 80-90 degree.
Add acid degumming:
Adding organic or inorganic acid to change the structure of colloid,to achieve the purpose of easy sedimentating.Add 85% phosphoric acid,the amount of oil 0.1%-1% , which was fully stirred under the 60-80 degree,then the mixed solution is fed into a centrifuge to colliod separation . 2, Deacidification
Alkali refining:Adding alkali to neutralize fatty acids and formed soap and water.we usually take the sodium-hydroxide solubilization.
Alkali refining itself has a comprehensive role in the deacidification, degumming, removal of impurities and bleaching:
1.Neutralization of FFA to form soap ,2 the soap adsorption protein and a small amount of mechanical impurities together sedimentating.
Distillation deacidification:
Using direct steam heating, t...
With high reputation! groundnut oil solvent extract facility

With high reputation! groundnut oil solvent extract facility

:
According to customers on the type of oil, daily processing volume, oil standards and other conditions of the requirements of processing customization, size, refining the number of cans, product prices are different.


1.Groundnut oil solvent extract facility

2.Low steam consumption

3.Vacuum evaporation

4.full automatic

5.PLC control With high reputation! groundnut oil solvent extract facility Groundnut oil solvent extract facility with low consumption flowchart: Groundnut oil solvent extract facility technological process introduction: Groundnut oil solvent extract facility main parts:
1. Solvent pumps: continuously spray solvent to the rotary-type extractor
2. Roary extractor: Spray and soak the pre-pressed cake with solvent so that oil fats can be diss-olved in solvent(form miscella). After processing, you can get wet meal and miscella (mixed oil).
3. LD: usd to separate the solvent from the wet meal.
4. Miscella tank 1st: pump the miscella (oil with solvent) in to the miscella 1st , then add saline water to it. The phospholipid in the miscella will react with the saline water, at last the reactant precipitate, reaching the goal of purifying.
5. Miscella tank 2nd: the purified miscella will be pumped into it.
6. Miscella stripping: it will remove the remaining solven...

Complete in specifications of crude oil refining facility

Complete in specifications of crude oil refining facility

Complete in specifications of crude oil refining facilityCrude oil refining facility processing flowchart:
Crude oil refining facility working principle: 1,Degumming
Method of hydration degumming:
Using the hydrophilic groups in oils,add certain amount of hot water or dilute of acid, alkali,salt or other electrolyte solution,to make the colliod swell and condense. then sedimentating and separating.The sedimentation of colliod called nigre.Low temperature hydration 20- 30 degree,High temperature hydration 80-90 degree.
Add acid degumming:
Adding organic or inorganic acid to change the structure of colloid,to achieve the purpose of easy sedimentating.Add 85% phosphoric acid,the amount of oil 0.1%-1% , which was fully stirred under the 60-80 degree,then the mixed solution is fed into a centrifuge to colliod separation . 2, Deacidification
Alkali refining:Adding alkali to neutralize fatty acids and formed soap and water.we usually take the sodium-hydroxide solubilization.
Alkali refining itself has a comprehensive role in the deacidification, degumming, removal of impurities and bleaching:
1.Neutralization of FFA to form soap ,2 the soap adsorption protein and a small amount of mechanical impurities together sedimentating.
Distillation deacidification:
Using direct steam heating, t...
Semi-automatic and full automatic castor oil refining facility

Semi-automatic and full automatic castor oil refining facility

Semi-automatic and full automatic castor oil refining facilityWhat is Semi-automatic and full automatic castor oil refining facility?This plant is used for making cooking oil from the oil seed and crude oil. It can remove the gum, color and bad smell etc. to make the oil meet the standard of eatingThe main processing of Semi-automatic and full automatic castor oil refining facility:Production description for Semi-automatic and full automatic castor oil refining facility :
1. The neutralizing tank is used for acid for acid,alkali refining or rinse
2. The decoloring tank is for bleaching grease
3. The deodorizing tank is sued for deodotization tank
4. The conducting oil furnance provide the heating for production
5. The vacuum pump provide vacumm for bleaching , deodorization which iscan reach 755mmkg.
6. The air compressor can dry the bleached clay
7. The air press is for filter clay
8. The stream gererator can gererate stream distillation9. The quality of die refined oil reached to the standards for edible oil and santitation by neutralization using phosphoric acid, water washing, bleaching andstean refining .The refinery methods for Semi-automatic and full automatic castor oil refining facility :
1. Chemical refining
2. Physical refining
3. Chemical-physical...
Home use soybean processing oil facility for sale

Home use soybean processing oil facility for sale

Application scope: Soybean processing oil facility flowchart:
  • Extraction section
Soybean cake -->Extractor -->Solvent spraying -->Micella -->Evaporation section -->Cooling system ↓ ↓ Cake -->Desolventization -->Cooling system --> --> --> Crude oil ↓ Meal -->Meal packing Soybean processing oil facility introduction:Extraction process
1. Solvent pumps: continuously spray solvent to the rotary-type extractor
2. Roary extractor: Spray and soak the pre-pressed cake with solvent so that oil fats can be diss-olved in solvent(form miscella). After processing, you can get wet meal and miscella (mixed oil).
3. LD: usd to separate the solvent from the wet meal.
4. Miscella tank 1st: pump the miscella (oil with solvent) in to the miscella 1st , then add saline water to it. The phospholipid in the miscella will react with the saline water, at last the reactant precipitate, reaching the goal of purifying.
5. Miscella tank 2nd: the purified miscella will be pumped into it.
6. Miscella stripping: it will remove the remaining...
Good performance soybean cooking oil processing facility

Good performance soybean cooking oil processing facility

Good performance soybean cooking oil processing facility Production Flow
1.Automatic production process of soybean oil making plant
Pretreatment: The pretreament is the necessary to make the oil,generally speaking the pretreatment including cleanning,decladding,softening,flaker and so on.Cleaning: it will remove the impurity from the material to improve the quality of the oil.Softening: Increasing the material elastoplasticity by controlling the wet and the temperature,so that improve the oil yield.Flaker:The material should have the balance of the thickness,have the suit size,not lost of the oil and so on.Press: Oil press operation, will handle good embryo into the hopper, oil from the hopper into the pressing chamber.By squeezer to advance into the spiral, squeezing.Because of material embryo in oil press in the bore of the press is under the running condition, under the condition of pressing chamber pressure, embryo and produce a lot of friction between squeezer, pressing chamber resistance.So you can make the embryo and material embryo produces friction caused by relative motion.Another face, squeezer root circle diameter is gradually enlargement, when press screw rotation, thread to make material embryo outward to move forward and reverse, at the same time close to squeeze materia...
Low price peanut oil facility

Low price peanut oil facility

Application scope:Peanut oil facility flowchart:
1.Press section flowchart:Metering →Cleaning →Magnetic separation→Destoner→Crushing →Softening →Flaking →Cooking →Pre-pressing →go to extraction section ↓ Second oil pressPeanut oil facility introduction:a. Cleaning device:remove the raw material peanut in various impurities, such as: iron, stones, clump, such as the plant leaf, clean up till impurity content does not exceed 0.2%.b.Crushing machine: peanut is crushed into 6-8 pieces. In order to meet the requirements of crushing, the peanut is suitable for crushing with the moisture of 7% to 12%.c. Softening process:the purpose of softening is to adjust the moisture and temperature of oil, and make it soft. d.Flaking process: rolling raw material into flakes, and the purpose is to increae surface area, destroy the peanut cell tissue, shorten the way of oil out from cake.e:Cooking process: use steam cooking, inject direct steam and cook the flakes to meet the requirement of oil press.f.Pre-press: press the flakes to leave about 16%-18% in the cake. The cake will go to extraction process.g.Second oil press: Press the cake till the oil residue is about 5%.Peanut oil facility advantage:
1.Our products have the high quality and high performance.we use the stainless steel insteadof the carbon steel.
2.we buy directly from the manufacturer for guaranteeing the quality.
3.our welding worker should get the certific...
Experienced supplier of rice bran oil extracting facility

Experienced supplier of rice bran oil extracting facility


1.Rice bran oil extracting facility.
2.CE & ISO
3.20-200MT per 24 HRS
4.Filed installation and training Manchine manufacturer of rice bran oil extracting facility.Pretreatment Process:
1.Screening:Removing the chaff and broken rice in the rice bran, in case of they will influence the oilyield and the desolvent of wet meal in the next process.
2.Magnetic separation :Clearing the iron impurity which might be in the rice brain. Since in the process of puffing, the iron impurity will be harmful to the screw of extrusion machine, affect the puffing effect.
3.Quenching and tempering :it is the process of preheating so that to improve the temperature of the rice bran before puffing. After quenching and tempering the temperature will be controlled at 65--75 °C, and the moisture will be controlled at 10 ~12%.
4.Puffing: To make the rice bran powder to pellet , it is much more easy to solvent extract the oil out.
5.Drying:The moisture of puffed material comes from the extrusion machine is too big and the temperature is too high for direct leaching, the must be experience to process of drying and coo-ling, thus the moisture will reach 7%...
Refining facility for sunflower oil /qatar crude sunflower seed oil refining palnt

Refining facility for sunflower oil /qatar crude sunflower seed oil refining palnt

Refining facility for sunflower oil /qatar crude sunflower seed oil refining palnt Craft features of oil production process
Oil production process includes three important parts :oil material pretreatment process, oil solvent extracting process and oil refining process.
1.Oil material pretreatment process The oil material pretreatment process includes the cleaning section,breaking section,flaking section ,softening section and oil pressing section.
1. Create a good product environment.
2. Minimize the total fat loss ,increase oil yield and output and improve the quality of oil and cake meal.
3. Comprehensively utilize impurities and offal.
4. Perfectly match extraction production line ,design different production processing according to different raw materials.
2.Solvent extraction process1,Adopting negative pressure evaporation can ensure excellent oil quality 2,Extraction system is highly adaptable and can adapt to different raw materials 3,All equipment is provided with exhaust gas absorption systems with excellent absorption effect 4 ,Full energy saving design utilizes heat energy for many times and saves steam consumption.
3. Refining process
1. Continuous alkali refining shortens contact time between oil and lye ,reduces grease saponification ,lowers refining ...