FAQ
Home    /   Products    /   new design palm kernel oil screw press

new design palm kernel oil screw press

New design palm kernel oil refinery with new technology

New design palm kernel oil refinery with new technology

Palm oil plantpalm kernel oil refinery
Detailed SectionReception stationThe FFB bunch be transported to plant by truck, after be weighted by weighting bridge(80T), the FFB will be loaded down to FFB Loading Ramp.
Sterilizing processBy Scraper Conveyor, FFB be transported to the top of sterilizing tank. Falling into sterilizing tank from feed inlet.
Threshing stationThe sterilized FFB will be transport to thresher(305) platform by scraper conveyor.
Press stationPalm fruit oil presser (402), the material of main shaft is 40Cr steel, (Chemical component: C0.37~0.44%; Si0.17~0.37%; Mn0.50~0.80%; Cr0.80~
1.10%) have been thermal refining, the material of worm and cone head is 45# Cast-Steel, and the surface have quenching treatment.
Clarification stationClarified oil flow into storage oil tank from discharge hole of classifying tank (605), after Disc-type separator remove moisture in the oil, and then though Plate heat ex-changer (615) heating to 105℃, remove residual moisture out of oil by Vacuum drier(616).
Production oilCompanyFactoryOur FactoryWorkshopOur WorkshopWarehouseOur WarehouseTeamOur Team
2016 Factory new design supply palm oil processing machine and palm kernel oil extraction machine for Indonesia/ Nigeria market

2016 Factory new design supply palm oil processing machine and palm kernel oil extraction machine for Indonesia/ Nigeria market

palm oil equipment Technical and Performance Indexes in Palm Oil Pressing Workshop(1)Crude palm oil standard: (2)Kernel Standard : Palm Fruit Pressing Process Description The palm oil is contained in palm pulp, the pulp is high moisture content and rich lipase. Usually we adopt the method of press to produce it, and this technology is very mature. Before press , Fresh fruit bunch will be taken sterilizer and thresher pretreatment : After weighting the FFB , it is loaded the FFB conveyor by loading ramp, then the FFB will convey to the vertical sterilizer. FFB will be sterilized treatment in sterilizer, the FFB will be heated and sterilized treatment for several time to avoid the lipase be hydrolyzed , after sterilizer ,the FFB is distributed bunch conveyor by the mechanical bunch feeder and enter the thresher machine which separate the palm fruit and bunch , for the empty bunch ,it is conveyed empty bunch loading platform and transport it to outside the factory area at fixed period , the empty bunch could be used as fertilizer and repeat use ; The palm fruit which has passed sterilizer and thresher processing should be sent to digester and then go to special screw press to get the crude palm oil (CPO) form the pulp . But the pressed palm oil contain a lot of water and impurity which need to be clarified by sand tr...
palm kernel nut oil screw press machine palm kernel nut oil screw press machine

palm kernel nut oil screw press machine palm kernel nut oil screw press machine

palm kernel nut oil screw press machine
1.1st grade edible palm kernel oil
2.Patent technology palm kernel nut oil screw press machine/palm kernel oil machine The whole palm kernel oil extraction machine contains three s: palm kernel pretreatment , palm kernel oil pressing and palm kernel refining .
1. Craft flow for palm kernel nut oil screw press machine palm kernel →Magnitic seperating( Metal impurities) → cleaning →husking → flaking roll →Cooking → pressing-Workshop Main Equipments:
1. palm kernel : It’s one of main oil seeds from human. It’s used to make palm kernel around the world. The oil content in palm kernel is about 50%.
2. Magnetic box: Clearing the iron impurity which might be in the palm kernel . The iron impurity will be harmful to the following machines, so we need take the iron impurities out.
3. Cleaning: This parts have different size cleaning sieves to clean the different impurities.
palm kernel nut oil screw press palm kernel nut oil screw press

palm kernel nut oil screw press palm kernel nut oil screw press

palm kernel nut oil screw press
1.1st grade edible palm kernel oil
2.Patent technology palm kernel nut oil screw press/palm kernel oil machine The whole palm kernel oil extraction machine contains three s: palm kernel pretreatment , palm kernel oil pressing and palm kernel refining .
1. Craft flow for palm kernel nut oil screw press palm kernel →Magnitic seperating( Metal impurities) → cleaning →husking → flaking roll →Cooking → pressing-Workshop Main Equipments:
1. palm kernel : It’s one of main oil seeds from human. It’s used to make palm kernel around the world. The oil content in palm kernel is about 50%.
2. Magnetic box: Clearing the iron impurity which might be in the palm kernel . The iron impurity will be harmful to the following machines, so we need take the iron impurities out.
3. Cleaning: This parts have different size cleaning sieves to clean the different impurities.
30TPD-100TPD Continuous and automatic palm kernel oil press machine / palm kernel oil extraction/palm kernel oil expeller

30TPD-100TPD Continuous and automatic palm kernel oil press machine / palm kernel oil extraction/palm kernel oil expeller

palm oil equipment Technical and Performance Indexes in Palm Oil Pressing Workshop(1)Crude palm oil standard: (2)Kernel Standard : Palm Fruit Pressing Process Description The palm oil is contained in palm pulp, the pulp is high moisture content and rich lipase. Usually we adopt the method of press to produce it, and this technology is very mature. Before press , Fresh fruit bunch will be taken sterilizer and thresher pretreatment : After weighting the FFB , it is loaded the FFB conveyor by loading ramp, then the FFB will convey to the vertical sterilizer. FFB will be sterilized treatment in sterilizer, the FFB will be heated and sterilized treatment for several time to avoid the lipase be hydrolyzed , after sterilizer ,the FFB is distributed bunch conveyor by the mechanical bunch feeder and enter the thresher machine which separate the palm fruit and bunch , for the empty bunch ,it is conveyed empty bunch loading platform and transport it to outside the factory area at fixed period , the empty bunch could be used as fertilizer and repeat use ; The palm fruit which has passed sterilizer and thresher processing should be sent to digester and then go to special screw press to get the crude palm oil (CPO) form the pulp . But the pressed palm oil contain a lot of water and impurity which need to be clarified by sand tr...
New design palm kernel oil processing machinary

New design palm kernel oil processing machinary

New design palm kernel oil processing machinary Palm fruit, palm kernel, coconut, cashew, avocado, tiger nut, peanuts, rapeseeds, soybeans,castor oil plant, sesame seeds, benne seeds, sunflower seeds, cotton seeds, tea seeds,Tung seeds and etc.
1. Introduction of palm oil mill 1)Palm oil mill have main five parts: Reception Station,Sterilizer,Threshing,Press,Clarifition and Kernel Recover. 2)We use the Fresh Fruit Bunch, because the palm fruit rancidity is very fast, if the rancidity will be influence the palm crude oil acid value,if the acid value is very high, the refining efficience will drop.3)Generally speaking, the palm oil mill be mainly located in Nigeria,Malaysia,Indonesia etc..
2. Main parts of palm oil mill 1) Reception Station: used for loading palm fruit brunch from plantation,transport to sterilizer. Reception station adopt steel structure and concrete structure. Save equipment cost and construction cost. Have hydraulic control system, hydraulic door open/off automatic achieve continuous operation. Reduce operator, operate more easily and improve work efficiency.2)Sterilizing Tank: The sterilizing tank uses direct steam to process, which can reduce activity of the enzyme,prevent the rancidity, ensure the good quality of the crude oil. At the same time, it is good for the trashing...
Palm kernel oil extraction machine Palm kernel oil expeller machine Palm kernel oil press machine

Palm kernel oil extraction machine Palm kernel oil expeller machine Palm kernel oil press machine

Zhengzhou shuliy machinery co.,ltdPalm kernel oil extraction machine Palm kernel oil expeller machine Palm kernel oil press machine
1. Description
The small palm oil press which designed and produced by our research institute, is suitable for 3-15 hectares small farm or processing with supplied materials from outside for individual household,economic and practical, cost recovery soon, very welcome by customers in Africa and South America.
2. Palm oil producing process
Palm oil is divided into red oil and white oil. Red oil is pressed by the palm fruit pulp, mainly for edible oil.White oil is pressed by the palm kernel, mainly for industrial oil.Red oil is made by the fresh palm fruit string, each string is 10Kg to 20Kg.The fruit string should do the high temperature cooking, Threshing the fruit for the string, heating and pressed by our palm oil press can get red oil with water and stag, with separting and filting get red palm oil
3.Parameter
Why choose us
1. Help you choose the most suitable machine.

2. Making the machine according to your request.

3. Give you machine’s details and video for help you use the machine more better.

4. One year warranty

5. Quality problem,we will send you the accessories.

6. Free repair whole using life without extra charge.If you are interested in our machine,welcome contact with me.Any questions i will reply your within 8 hours
Palm kernel shell separator machine, palm kernel oil extraction processing machine palm kernel shell sepatating machine

Palm kernel shell separator machine, palm kernel oil extraction processing machine palm kernel shell sepatating machine

Palm kernel shell separator machine, palm kernel oil extraction machine palm kernel shell sepatating machine Palm Nut Cracking & Oil Production Line 2000-3000KG/H We are professional manufacturer of palm kernel oil milling machine,we can offer complete solutions of palm kernel oil milling to palm kernel oil refining. We manufacture unique Palm Kernel Oil Milling machine to extract the palm kernels and obtain the pure and natural palm kernel oil. Nowadays there are more and more small or big palm oil mills in Nigeria, after processing palm fruit, there are much palm nut and fiber remained. Fiber can be as animal feed or fertilizer. While they do not know how to deal with palm nut because In fact, palm kernel oil is more valuable than palm f r uit oil. Palm kernel oil is more expensive than palm oil in the supermarket. Palm kernel oil (PKO) is a lucrative product from palm oil fruit. After palm oil is produced, the palm kernel remains.
Crude Palm kernel Oil making machine/Palm kernel Oil Extraction Machine/Palm kernel Oil Press Machine

Crude Palm kernel Oil making machine/Palm kernel Oil Extraction Machine/Palm kernel Oil Press Machine

Palm kernel oil making machine for sale operating principle: When palm kernel oil making machine is on work, material enters the extruding chamber from the hopper and then moves forwards by the rotating pressing screw and is pressed.Under hightemperature condition in the chamber, there is quite strong friction among press screw, chamber and the oil materials. On the other hand, root diameter of the pressing screw carries larger from one end to the other. Hence when rotating, the thread not only pushes particles moving forwards but also turns them outwards as well. Meanwhile, particles adjacent the screw will rotate along with screw’s rotating, causing every particle inside the chamber to possess different speed. Therefore, relative movement among particles creates neat which is necessary during manufacturing because of helping protein change property, damage colloid, increase plasticity, decrease oil’s elasticity, resulting in high oil. Palm kernel oil making machine for sale construction features:
6YL series spiral oil press is mainly composed of 7 major parts of screw axis, press cage, feed mechanism, cake yielding mechanism. transmission system, electric control part and vacuum filter part. All the parts are assembled on the frame and screwed as a whole.
Palm kernel oil making machine for sale characteristic:
Simple design , easy to operate , wide suitability.
Continuous operation, high productivity.
...
New design cold oil press for palm kernel

New design cold oil press for palm kernel

New design cold oil press for palm kernel
Main technical parameters of Cold oil press for palm kernel
Raw material and oil yield of different oil crops: Advantages of Cold oil press for palm kernel:Simple structure, easy to use, adaptable, high oil rate, energysaving, and low noise. Material selection is exquisite, reasonable design, beautiful shape, reliable quality.Simple operation, less land occupation, labor saving, power saving, high yield, and oil quality is good, and so on. All technical indexes are leading in the same trade of the stateowned oil press. And the model of 6YL-80 and 6YL-100 are the new type products reformed by our factory engineers, which are the advanced equipment in the oilseeds processing machinery recently. Cold oil press for palm kernel operating principle
1.When small oil expeller is on work, material enters the extruding chamber from the hopper and then moves forwards by the rotating pressing screw and be pressed.
2.Under hightemperature condition in the chamber, there is quite strong friction among press screw, chamber and the oil materials.
3.On the other hand, root diameter of the pressing screw carries larger from one end to the other.
4.Hence when rotating, the thread not only pushes particles moving forwards but also turns them ...