FAQ
Home    /   Products    /   vegetable seed oil press canola oil press machine

vegetable seed oil press canola oil press machine

Canola Seed Oil Processing Plant ,Canola Seed Oil Produce Produce Machine

Canola Seed Oil Processing Plant ,Canola Seed Oil Produce Produce Machine

Canola Seed Oil Processing Plant Canola Seed Oil Processing Plant Pre-pressing Flow chart:
Canola Seed Oil Pre-pressing Flow chart: Canola Seeds →Metering machine→Magnetic separation→Clearing→Softing→Flaker→Steam Cooker→Prepressing→Filter→Cake →Countercurrent cold and dry box→To solvent extraction plant ↓ Crude oil ↓ RefiningMain Process description:
1.Metering machine:To meter quantity canola seeds. Discharge them to temporary storage tank. If there have matter in this production. You need to close this meter machine to stope produce. This can prevent seed over load.
2.Magnetic selector:Magnetic separation equipment without power and exhaust system were used to remove iron. Dust removing wind net is installed.
3.Cleaning: In order to obtain high effective cleaning, ensure good work condition and production stability, high efficient vibration screen was used in the process to separate big and small impurity.
4.Flaker: Flaking means a certainty granularity of canola lamella was prepared for flaked of about 0.5 mm, the oil of raw material can ...
Dewaxing equipment for canola oil,Chinese canola oil processing manufacturer

Dewaxing equipment for canola oil,Chinese canola oil processing manufacturer

Dewaxing equipment for canola oilTechnology Introduction of Dewaxing equipment for canola oil : oil dewaxing machine and production technology developed by our company is of advanced technology, full computer automatic cooperation, lower investment cost, high liquid oil yield, high solid fat purity and high economic benefit.- oil dewaxing machine is a kind of new oil processing technology.- By using oil dewaxing machine , the s Corn oil products of different melting points can be obtained, such as 8, 10, 1 4, 18, 2 4, 3 3, 4 4, 55 degree etc.- At the same time, it can also be used to process palm oil and sunflower seed oil, which can greatly improve additional value of oil products, and increase economic benefits of the enterprise. The main process of Dewaxing equipment for canola oil:(1) Dewax of Dewaxing equipment for canola : used to remove off the wax in the oil, in order to get the high quality oil.(2) Heat-transfer oil of Dewaxing equipment for canola oil : supply each device production needing heat energy, temperature reach above 280°C. (3) Steam generator of Dewaxing equipment for canola oil: produce the needing steam for de-odoring and distillation.(4) Vacuum pump of Dewaxing equipment for canola oil machine : supply needing vacuum for dehydrate, de-color, de-odor. Vacuum d...
Oil making machine for canola extraction,canola oil solvent extraction plant equipment,best oil solvent extraction equipment

Oil making machine for canola extraction,canola oil solvent extraction plant equipment,best oil solvent extraction equipment

Oil making machine for canola extraction,canola oil solvent extractionplant equipment,best oil solvent extraction equipmentOur Features of Oil making machine for canola extraction,canola oil solvent extraction plant equipment,best oil solvent extraction equipment
3. The feeding system can adjust the rotating speed of airlock and main engine according to the feeding quantity and maintain a certain material level, which is beneficial to the micro negative pressure inside the extractor and reduce the solvent leakage;
4. The advanced miscella circulation process is designed to reduce the fresh solvent inputs, reduce the residual oil in meal, improve the miscella concentration and save energy by reducing the evaporation capacity;
5. The high material layer of the extractor helps to form immersion extraction, reduce the meal quality in miscella, improve the quality of crude oil and reduce the evaporation system scaling;
Specially suitable for the extraction of various pre-pressed meals.Introduction of Oil making machine for canola extraction,canola oil solvent extraction plant equipment,best oil solvent extraction equipment The cake from oil press section could also be used as raw material for solvent extraction plant, the chemical way to extract oil. This kind of extraction uses chemical solvent to...
Canola oil production machinery ,Professional canola oil processing machinery manufaturer

Canola oil production machinery ,Professional canola oil processing machinery manufaturer

Canola oil production machinery
1. Introduction of Canola oil production machinery (1) Function: Edible oil extraction machine is an oil extractor through soaking or spraying pre-pressed cake by a certain organic solvent. The principle of this part is the different solubility of solvent(2) Use range: Edible oil solvent extraction fits for pre-press extraction of high-oil- content materials and direct once time extraction of low-oil-content materials.(3) Main parts: The edible oil extraction making series includes rotary extractor, toaster, 1st evaporator, 2nd evaporator, stripping
2. Main parts function of Canola oil production machinery (1) Solvent pumps: continuously spray solvent to the rotary-typr extractor.(2) Roary extractor: spray and soak the pre-pressed cake with solvent so that oil fats can be dissolved in solvent (form miscella). After processing, you can get wet meal and miscella (mixed oil).(3) DTDC: used to separate the solvent from the wet meal.(4) Miscella tank 1st: pump the miscella ( oil with solvent) into the miscella 1st, then add 10% saline water to it. The phospholipid and impurities in the miscella will react with the saline water, at last the reactant precipitate, reaching the goal of purifying.(5) Miscella tank 2nd: the purified miscella will be pumped into it.(6) Miscella st...
Canola edible oil production machine ,Professional canola oil processing machinery manufaturer

Canola edible oil production machine ,Professional canola oil processing machinery manufaturer

Canola edible oil production machine
1. Introduction of canola edible oil production machine (1) Function: Edible oil extraction machine is an oil extractor through soaking or spraying pre-pressed cake by a certain organic solvent. The principle of this part is the different solubility of solvent(2) Use range: Edible oil solvent extraction fits for pre-press extraction of high-oil- content materials and direct once time extraction of low-oil-content materials.(3) Main parts: The edible oil extraction making series includes rotary extractor, toaster, 1st evaporator, 2nd evaporator, stripping
2. Main parts function of Canola edible oil production machine (1) Solvent pumps: continuously spray solvent to the rotary-typr extractor.(2) Roary extractor: spray and soak the pre-pressed cake with solvent so that oil fats can be dissolved in solvent (form miscella). After processing, you can get wet meal and miscella (mixed oil).(3) DTDC: used to separate the solvent from the wet meal.(4) Miscella tank 1st: pump the miscella ( oil with solvent) into the miscella 1st, then add 10% saline water to it. The phospholipid and impurities in the miscella will react with the saline water, at last the reactant precipitate, reaching the goal of purifying.(5) Miscella tank 2nd: the purified miscella will be pumped into it....
Oil extraction machine for canola oil extraction machine,canola oil extraction machinemanufacturer from 1982

Oil extraction machine for canola oil extraction machine,canola oil extraction machinemanufacturer from 1982


1.Edible oil pretreatment ---canola oil extraction machine canola oil extraction machine - Main Equipments:
1. Storange tanks: Oil seeds receiving and storage
2. Magnetic box: Clearing the iron impurity which might be in the oil seeds. The iron impurity will be harmful to the following machines, so we need take the iron impurities out.
3. Cleaning: This parts have different size cleaning sieves to clean the different impurities. After going through this part, most of the impurities are moved from oil seeds.
4. Cooker: This machine can adjust the water content of the oil seeds. It’s also good for the press and oil extraction section.
5. Press: The press machine is used to take parts or all of the oil in the oil seeds. We will design the suitable machine according to your requirement.
6. Oil filter: After getting coconut oil, the filter is used to move the impurities in the oil.
2.Edible oil extraction -canola oil extraction machine canola oil extraction machine=========Main Equipments:
1. Solvent pumps: continuously spray solvent to the rotary-typr extractor.
2. Roary extractor: spray and soak the cake with solvent so that oil fats can be dissolved in solvent (form ...
Hot sale rapeseed oil extraction machine, canola seed processing equipment, canola oil solvent extraction plant

Hot sale rapeseed oil extraction machine, canola seed processing equipment, canola oil solvent extraction plant

Hot sale rapeseed oil extraction machine, canola seed processing equipment, canola oil solvent extraction plant MAIN PROCESS OF SOVLENT EXTRACTION:MAIN SECTIONS IN SOLVENT EXTRACTION SYSTEM:
1. Solvent extraction process;
2. Wet meal desolventizing process;
3. Evaporation process;
4. Solvent condensation & recovery process;
5. Paraffin recovery process.WHAT ARE QI'E SOLVENT EXTRACTION MACHINES LIKE?ABOUT QI'E ROTOCEL EXTRACTOR:a) Adopt stainless steel fixed grid plate and increase the horizontal grid plates, which can prevent the strong miscella from flowing back to the blanking case, so as to ensure good extraction effect;b) The rotocel extractor is driven by rack, with unique rotor of balanced design, low rotating speed, low power, smooth operation, no noise and quite low maintenance cost;c) The feeding system can adjust the rotating speed of airlock and main engine according to the feeding quantity and maintain a certain material level, which is beneficial to the micro negative pressure inside the extractor and reduce the solvent leakage. d) The advanced miscella circulation process is designed to reduce the fresh solvent inputs, reduce the residual oil in meal, improve the miscella concentration and save energy by reducing the evaporation capacity. e) The high material layer of th...
Canola oil extraction plant /Canola oil processing machinery

Canola oil extraction plant /Canola oil processing machinery

We have been specialized in canola oil extraction plant since 196
7. We can offer whole line of canola oil extraction plant with turnkey service, capacity from 10 to 6000TPD . For special capacity, our engineers can help you design and install canola oil extraction plant according to your real conditions.
Canola oil extraction plant starts with rapeseed, with oil content 40%, more or less. Same with other common oilseeds, there're four main sections of canola oil extraction plant, including prepressing/pressing/pretreatment section, solvent extraction section, refinery section and dewaxing/winterization section.
:Skype:sophia.zang1Mobile:+86 13526627860Phone:+86-371-5677 1823Website: E-mail: [email protected]
seed extration,canola seed oil solvent extraction plant equipment,edible oil production

seed extration,canola seed oil solvent extraction plant equipment,edible oil production

Raw Material The oil machine is suitable for different materials, but the process of each materials is various. If you really need to process oilseeds, welcom to know much from us. The main materials is rice bran, peanut, palm, sunflower, corn germ, soybean, sesame, cottonseeds and so on. Canola Oil Extraction Machine The whole process for canola oil extraction machine includes canola pretreatment, canola oil solvent extraction machine and canola oil refinery sections.


1. Craft flow for canola pretreatmentCanola--> magnetic box --> cleaning --> husking machine --> flaking roll --> plate dryer --> to extraction Main Equipments:
1. Magnetic box: Clearing the iron impurity in the canola. In order to avoid the harmful to the following machines, the iron impurity need be moved first.
2. Cleaning: There are many different imputities in the canola such as small stone, earth, straw and so on. They are not only broken the machine, but also effect the quality of final oil.
3. Husking machine: This will help to separate the shell from the seed.
4. Flaking roll: The canola pieces need be make to think cake. At the same time, the cell in the canola is broken, so the oil is easy to go out.
5. Plate dryer: The water content of the extractor must be about 10%, so the dryer is used to adjust the water content in this step.
2.Craft flow fo...

20-2000T canola oil cold pressed machine with CE and ISO

20-2000T canola oil cold pressed machine with CE and ISO

canola oil cold pressed machine
1.The residual:<1%
2.1st grade canola oil
3.Patent technology
4.Good smell canola oil Canola Oil Cold Pressed MachineThe whole canola oil cold pressed machine contains three s: canola oil seeds pretreatment , canola oil extraction and canola oil refining .
1. Craft flow for canola oil pretreatment oil seeds → magnetic box → cleaning → cooker → oil press → oil filter → to extraction Main Equipments:
1. Oil seeds: We can provide machine to process various oil seeds, such as canola, peanut, soybean, sunflower, coconut, mustard, palm rapeseed and so on.
2. Magnetic box: Clearing the iron impurity which might be in the oil seeds. The iron impurity will be harmful to the following machines, so we need take the iron impurities out.
3. Cleaning: This parts have different size cleaning sieves to clean the different impurities. After going through this part, most of the impurities are moved from oil seeds.
4. Cooker: This machine can adjust the water content of the oil seeds. It’s also good for the press and oil extraction section.
5. Press: The press machine is used to take parts or all of the oil in t...