FAQ
Home    /   Products    /   china make peanut oil machines supplier in chile

china make peanut oil machines supplier in chile

Fabricator of machine to make corn flake, equipment to make soybean flake

Fabricator of machine to make corn flake, equipment to make soybean flake

Fabricator of machine to make corn flake, equipment to make soybean flake WHAT OILSEEDS ARE AVAILABLE? QI'E MAIN BUSINESS SCOPE: 30-1000T/D oil continuous grade one or two physical (chemical) refining production line; MAIN PROCESS OF SOYBEAN PRETREATMENT:MAIN PROCESS OF PRETREATMENT/PRESSING PROCESS:ABOUT PRETREATMENT/PRESSING SECTION:(1) Cleaning: By using Wind-driven separator, dust removing system, magnetic separation, gravity separator to remove impurity.(2) Shelling, de-hulling, delinting, softening: By using shucking machine to remove shell of oilseeds, because shell will influence the rate of oil yield and equipment service life. (3) Crushing: By using flaking machine break oilseeds into pieces. This will make the surface of oilseeds bigger, which is easier to be cooked. extract edible from oilseeds easier, and can also increase the oil yield.(4) Cooking: By using cooker, It will make edible oil easier to be prepressed extracted from the oilseeds.(5) Prepressing/pressing: By using pressing machine to extract oil out of oilseeds. And make oilseeds become cake. After this step you will get crude edible oil and cake. After prepressing, there are about 18% resid in the cakes, the cakes will be sent to the solvent extraction plant.MACHINE IN OIL PLANT:Pressing se...
Advanced new condition machine make corn germ oil, China corn oil factory supplier

Advanced new condition machine make corn germ oil, China corn oil factory supplier

Advanced new condition machine make corn germ oil, China corn oil factory supplierWhat oilseeds are available?Main process of pressing section: Brief introduction of each section:(1) Cleaning section: Magneticor is to rid off the iron. (2) Flaking section: To make the sunflower seed into pieces between the thickness 0.3 – 0.35 mm, so it’s well-proportioned by heating,also for the soaking process. (3) Steaming and drying section: The process is to Add the hot water into the seeds crushed/flaked to moist ,to add steam for steaming the seeds, to dry the seeds for ridding off more water content. In the process, with the water and temperature to make the protein of seeds change the character, make the oil molecule loose for easily pressing to get rude oil ,also get the better cake and oil . Water content: 5 – 10%; temperature: 105 – 110 degrees; Requiring Time: 40mins. (4) Pressing section: The process is to press the seeds and get the rude oil. (5) Oil filtering section: Firstly to filter the rude oil with oil-dreg sieves, then use oil filter for clear the small dregs.The oil cleaned is pumping into oil tan...
Machines to Make Olive Oil Mini Screw Oil Press Nut Oil Extractor

Machines to Make Olive Oil Mini Screw Oil Press Nut Oil Extractor

Machines to make olive oil mini screw oil press nut oil extractorModel ZY/ZX screw oil press is the large-sized equipment of contiunous press and have obtained ISO9001-2000 authentication. It's suitable for pressing cottonseed,rapeseed, tung seed, sunflower seed, groundnut seed and other high oil contained plants. Its characteristics are high capacity, low power consumption, low cost in running, the construction of the press cake is soft but not fragmentary, and the solvent is apt to infiltrate, lower oil in cake. So, it's the excellent choose of press equipment for the large and medium-sized oil factory.And we can also customized with your requirements. Technical Dates Other type pictureAbout our companyZhengzhou Sinoder Indutech Machinery Co., ltd (hereafter referred to as "Sinoder") is a joint-stock machinery developing enterprise group, integrating industrial scientific research, production and marketing. The company is located in the Industry Area Zone of Zhengzhou, China.Sinoder Indutech Machinery Group is one of professional supplier of industrial machinery & accessories in China. The group has industrial machinery department, equipments accessories department, instrument & sensor department, industrial solution department and marketing service department. Scientific and technological innovation, excellent quality, customer satisfaction i...
High efficiency oil refinery /oil expeller/palm oil refinery machines to make edible oil

High efficiency oil refinery /oil expeller/palm oil refinery machines to make edible oil

palm oil refinery machines Easy to operate, less labor High oil rate, high economical profit High efficiency oil refinery /oil expeller/palm oil refinery machines to make edible oil General introduction of oil refinery
1.The edible oil refinery is used for removing the impurities of oil, such as, fatty acid, phosphatide, metal ion, pigment, oxide, solid particle and volatile gas. It suitable for refining various crude oil, vegetable oil, such as sunflower seed oil, tea seed oil, groundnut oil, cottonseed oil, rice bran oil, soybean oil, corn oil and palm oil,etc.

2.The edible oil refinery can adopts chemical refining and physical refining, and the chemical refining includes batch refining, semi-continuous refining and continuous refining
Application It can refine many kinds of oil, such as soybean oil, rapeseeds oil, peanut oil, sesame oil,sunflower oil, flax seeds oil, camellia oil, hemp seeds oil, cotton seeds oil, castor seeds oil, mustard seeds oil,palm oil,and all the oil content cropsThe main processing equipments of crude oil refinery machine
1. Crude oil

2. Degumming

3. Deacidification

4. Bleaching

5. Frame filter

6. Deodorization

7. Dewaxing

8. Leaf filter
The procedures of oil refinery
1. The neutralizing tank is used f...
Easy make money small manufacturing machines

Easy make money small manufacturing machines

Easy make money small manufacturing machinessmall manufacturing machinesAccording to the different raw material, we do use different technology and equipment, according to customers’ requirement or needs, you can choose pressing technology, pressing solvent extraction technology or extruding solvent extraction technology. With our suggestions ,you will find the most suitable technology and equipment here.The pretreatment of home sunflower oil press machine
Before the material is pressed or solvent extracted, the material shall be processed, first, it shall be cleaned, a cleaning sieve is needed to remove the small, bigger sizes of impurities. The destoner is needed to remove the stones in the material, the magnetic machine is used to remove the small metals like iron, and others. Then the material shall be crushed, soften, flaked, then cooked, all the processing is to make sure the oil in the material will be extracted out easily and thorough.
The pressing of home sunflower oil press machine
As for the high oil content material, such as, peanut, sesame, sunflower seed, coconut, castor seeds, we do use pressing solvent extraction technology. There shall be some residual in the cake after the material is pressed, usually, the residual by using pressing technology is 6-8%,it is a waste of the oil if we d...
Machine to make cotton seed oil pressing machines

Machine to make cotton seed oil pressing machines

The parameters of cotton seed oil line The pretreatment of cotton oin lineCotten seed → Metering→Winnowing → Husking→Flaking→cook→Pressing→Cake to solvenextraction and Crude oil to refining Cleaning process: ShellingThe equipment is comprised of ftransmission mechanismeeding apparatus,magnetic separation,crushing,Roller spacing adjusting ,engine base.The machine has large capacity ,small floor space,lower power consumption,easy to operate, High shelling efficiency.roller shelling is no less than 95%.Kernel husk separatorIt is mixture after shelling of cotten seed.The mixture includes full oil seed without any crushing,seed shelled and husk,all the mixture must be separated.Technically,the mixture must be divided into kernal,husk and seed.Kernal will go to the process of softening or flaking section.Hush will go to storeroom or package.the seed will go back to shelling machine. Flaking: Flaking means a certainty granularity of soy lamella was prepare. for flaked of about 0.3 mm, the oil of raw material can be extracted in the shortest time and maximum, and residual oil was less than 1%. Cooker process This process is heating and cooking for rapeseed which is easy to separate of oil and can provide the oil quantity from prepress machine.It is easy to operate and have long life. Oil pressing :The solvent extraction of cotton oil making Material embryos→Extraction→Wet meal→Evaporation→Cooling→Product ...
peanut oil press machine peanut cold press oil machine machine to make peanut oil

peanut oil press machine peanut cold press oil machine machine to make peanut oil

peanut oil press machine peanut cold press oil machine machine to make peanut oilApplication:Widely use: it can press many kinds of oil seeds, such as Rape seed, tea seed, soybean, peanut, Chinese prickly ash seed, sunflower seed, cottonseed, Chinese tallow tree seed, tung oil tree seed and corn, sesame etc.Structure:
Screw oil press is a popular type of oil press machine, mainly composed of feeder, gearbox, pressing chamber and oil receiver. Some screw oil press machines are equipped with electric motors as required. Pressing chamber is the key part which contains a pressing cage and a screw shaft rotating in the cage. An electric cabinet is also necessary to control the whole working procedure. Features:
Different from the automatic screw oil press, this screw oil press has its own features and markets.

1.Made of high quality steel, wear-resistant and easy to clean.

2.With the properly designed pressing chamber, the increased pressure in the chamber highly improves working efficiency.Main
Alibaba China machine to make peanut oil expeller in low price

Alibaba China machine to make peanut oil expeller in low price

1, machine to make peanut oil expeller brief introductionThis machine type can press copra, sesame, walnut, sunflower seed, peanut, rapeseed, soybean, and so on. It has micro electric control, infrared heating, vacuum filter, triple squeezing and multi-stage pressing. The product oil after filter can be used directly. It is cold and hot amphibious type. 2, machine to make peanut oil expeller technical parameters 3, machine to make peanut oil expeller spare partsWorm, squeezing head, worm shaft, cage bar, heater ring, cake outlet, vacuum filter. 4, machine to make peanut oil expeller details
1. High oil yielding, low oil residual in the cake:The oil left in cake is less than 6%. The cake thickness can be adjusted once the machine stops running;
2. Compact size: only 10-20m2 is enough.
3. High purity: machine surface is made of chrome plated stainless steel, in line with food hygiene standards.
4. Easy operation. You should operate as per the instruction.5, machine to make peanut oil expeller operating principle
1.When oil press is on work, material enters the extruding chamber from the hopper and then moves forwards by the rotating pressing screw and is pressed.
2.Under high temperature condition in the chamber, there is quite strong friction among press screw, chamber and the oil materials.
3.On the other hand, root diameter of the pressing screw carries larger from one end to the other.
4.Hence when rotating, the thread not only p...
Lowest Price peanut oil make machine peanut oil making machine peanut oil maker machine

Lowest Price peanut oil make machine peanut oil making machine peanut oil maker machine

Kaifeng Rainbow Machinery Co.,Ltd Oil Extraction Machine KAIFENG RAINBOW MACHINERY Co.Ltd. is specialized in production of machines used in food, feed, farm and tech field. We have our own professional research and development department, and specialized production base. Relying on the strong industrial and technological superiority and excellent transportation advantage, our company has had strategic development. High quality is our obligation. Great service is our mission.We warmly welcome clients around the whole world to visit our plant and our Office! About packaging, for small size or single machine, we can offer free fumigation wooden case with steel frame, it not only can protect machine from damage, but also avoid checking when exporting. For multiple machines or production line, it's better to loaded in standard container 20GP, 40GP, 40HQ, unually it needs wrapped with plasitc firstly, then loaded in container.
Peanut oil refining machine to make peanut oil

Peanut oil refining machine to make peanut oil

peanut oil refining machine to make peanut oil
The objective of refining is to remove objectionable co-constituents in oil with the least possible damage to glycerides and minimal loss of desirable constituents. Ways of refining depend on nature and quantity of impurities contained in crude oil, application of RBD oil.
Classical chemical refining is used through successive steps: it must be degumming, neutralizing, bleaching, deodorizing and sometimes winterizing (Mainly removing free fatty acid and other minor constituents).The set of equipment has obtained national patent (patent No. is ZL99 2528
8.7), it is our
developed third generation product with more advanced and mature technology, and it
won GoldMedal on 8th China Fair of Inventions and New Technologies and Silver Medal
on 6th International Invention Exhibition. It adopts intermittent refining craft, and has advantages of convenient transportation, small covering area, less operation staff and saving energy.
Main equipment and process flow for peanut oil refining machine to make peanut oil:1) Machines include:
degumming pot, deacidification pot, bleaching tower, deodorization pot, steam
separator, gear pump, water pump, etc.
2) Process flow:
First step :
Peanut →clean→Dehusking→crack(or rough milling)→softening→flaking→cooking→pressing→crude Oil Second Step: Crude Oil→filtering→ Degumming→ Deacidification...